Air fitting leak

[Unilevers]

honestly, ive fixed so many of those leaks from those big push fittings its just not worth it. Grab a real 90 degree compression fitting and remove that POS and put a proper fitting in there. quick connects suck and leak with cold, vibration, or just cause they want to. Compression fittings when installed properly very very rarely leak.

i see this so many times on blown apart fanhubs, a push fitting on the air into it and its leaking but you cant hear it. it causes the hub to never fully disengage and burns the hub out in short order. never ever ever use a shitty push fitting on a fanhub.

if i owned the truck it would not have a single push air fitting on it, i would install proper fittings in every spot possible.