Procedure for Cleaning Glycol from isx15 Engines

[imalumberjack]

(06-16-2018 )same101us Wrote:  I have engine apart. Head, oil pan, and turbo are of the engine. Would it be a problem if I assemble engine and run it with cheap 15w40 than drain it and fill it again with new oil?

Glycol has a tendency to be sticky ....it can cause a spun bearing. If it were me I think I would pull the oil cooler and replace or at least flush to make sure its clean (I think the oil cooler would be the biggest holder of oil), then I would still try to push a few gallons of oil through system before a start, then start and run and then change oil again.