Procedure for Cleaning Glycol from isx15 Engines
06-17-2018, (Subject: Procedure for Cleaning Glycol from isx15 Engines ) 
Post: #11
RE: Procedure for Cleaning Glycol from isx15 Engines
I just pre-lube the engine after assembly for good measure. I pump all 11+ gallons of oil in using this pump...
https://amzn.to/2GSenSy

I remove the plug and valve at position #2 in this post and install a garden hose fitting ...
http://rawze.com/forums/showthread.php?t...873#pid873

I also turn on the key-switch in the dash and watch for oil pressure while doing so.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Brock , Waterloo , Chamberpains , same101us


Messages In This Thread
RE: Procedure for Cleaning Glycol from isx15 Engines - Rawze - 06-17-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.