My Pete rebuild

[Nostalgic]

When I put the main caps on, the way the sealant squished out the sides towards the bearings has me paranoid. If it was done during an inframe, no one would ever be able to see it, but since it's a bar block upside down, I did, and I'm going to pull some caps off and make sure none made it to the bearings. I remember seeing some on the back side of the halves when I cleaned up the caps, and now I know why. I think the bead suggested is just too much.

But, I took a day off for important things like getting sunburned and eaten alive by lake flies.