Fan cycles to much |
05-03-2016, (Subject: Fan cycles to much ) Post: #10 | |||
| |||
RE: Fan cycles to much Sounds like it's the A/C pressure sensor. Should be on the driver side of the condenser. Unplug the sensor and put a paper clip between the wiring harness terminals when it's cycling the compressor and shouldn't be. If it goes out ya found your problem. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - Waterloo - 05-03-2016, RE: Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - Billdozer2 - 05-03-2016, RE: Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - Billdozer2 - 05-03-2016, RE: Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - Vin - 05-03-2016, RE: Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - schISM - 05-03-2016 RE: Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - Nilao - 05-03-2016, RE: Fan cycles to much - ahm700 - 05-03-2016, RE: Fan cycles to much - Nilao - 05-04-2016, RE: Fan cycles to much - 389driver - 05-04-2016, RE: Fan cycles to much - redbeard - 05-04-2016, RE: Fan cycles to much - ahm700 - 05-04-2016, RE: Fan cycles to much - flying240 - 05-04-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.