Droping the transmission |
05-04-2016, (Subject: Droping the transmission ) Post: #11 | |||
| |||
RE: Droping the transmission That jack is too narrow in my book and may not lift high enough if you have the truck on blocks or jack stands. A good truck trans jack will be much wider and the plate should be about 12x18 inches. Rawze is right about the Chinese metal. I would be afraid of it buckling under stress. You might search Craigslist for a good used one for the same price. I'm all for DIY but only if I can do it safely and don't have to do it twice. User's Signature: 2010 386 Pete CM871, 13 spd. 3.55 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Droping the transmission - sbtrucking - 05-03-2016, RE: Droping the transmission - Waterloo - 05-03-2016, RE: Droping the transmission - 389driver - 05-03-2016, RE: Droping the transmission - scottydogtruck - 05-03-2016, RE: Droping the transmission - in2trux - 05-03-2016, RE: Droping the transmission - jorden486 - 05-03-2016, RE: Droping the transmission - sbtrucking - 05-04-2016, RE: Droping the transmission - Rawze - 05-04-2016, RE: Droping the transmission - Hedley - 05-04-2016, RE: Droping the transmission - Waterloo - 05-04-2016, RE: Droping the transmission - in2trux - 05-04-2016 RE: Droping the transmission - ahm700 - 05-05-2016, RE: Droping the transmission - in2trux - 05-05-2016, RE: Droping the transmission - ahm700 - 05-05-2016, RE: Droping the transmission - Wiseman - 05-05-2016, RE: Droping the transmission - ahm700 - 05-05-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.