2250 pump failure.....and the result. |
05-04-2016, (Subject: 2250 pump failure.....and the result. ) Post: #1 | |||
| |||
2250 pump failure.....and the result. This guy was not able to start his truck.....which was a good thing. I told him to check the fuel pressure upon cranking and it was 70psi. I advised him to check the specs because I thought that was low. He did and pulled the pump....guess what? He is now asking if there is a rebuild kit out there and I advised him to go completely over the engine and flush the oil out. Prolly pull the pan and check the rods and mains too. This guy may have dodged a bullet but if you have any thoughts let me know and I will pass it on. I dont believe he had the recall filter on the pump. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
2250 pump failure.....and the result. - preacherboy24 - 05-04-2016 RE: 2250 pump failure.....and the result. - preacherboy24 - 05-04-2016, RE: 2250 pump failure.....and the result. - Waterloo - 05-04-2016, RE: 2250 pump failure.....and the result. - jimeneztrans84 - 05-04-2016, RE: 2250 pump failure.....and the result. - Moore - 11-14-2018, RE: 2250 pump failure.....and the result. - Rawze - 11-14-2018, RE: 2250 pump failure.....and the result. - imalumberjack - 11-14-2018, RE: 2250 pump failure.....and the result. - Moore - 11-16-2018, RE: 2250 pump failure.....and the result. - Rawze - 11-16-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.