Diamond Logic Software HELP

[Rawze]

No power to the clutch at all is only a couple things if it is not a wiring or fuse issue.

* System detects it has less than 50-psi in on the high pressure switch.

* System thinks one of the thermistors on passenger side of truck is out of range so badly that it assumes it is unplugged or shorted out.

* System thinks the ambient air sensor for the enigne/truck is out of range/unplugged.

-- When those conditions are met, typically even if the thermistors and sensors are reading wrong, the system will kick the compressor on for a little while (about 10 minutes) but then fault out if it does not like something.

==========

Diamond Logic software is the normal troubleshooting software for the Internationals cab controller. Although I would never take my truck to one, especially for A/C problems,... Every international stealershit has it so that they can work on the truck that I have ever seen.