Fan not turning on
07-31-2018, (Subject: Fan not turning on ) 
Post: #22
RE: Fan not turning on
(06-12-2018 )Nilao Wrote:  The ecm supplies the ground. When you interrupted ground you de energize the solenoid allowing the air on the fan side to exhaust from the bottom.

Do not purchase a 2 port. All the have is an inlet and outlet. There is no way to vent the pressure on the fan hub without a exhaust port.

You want a 1/4" 3 port normally open pnuematic valve. Something like https://amzn.to/2LfwCXo

Ok I got a 3 port that you recommended and it doesn't have port instructions one on one side marked. N. On the other side no markings here are some pix


Attached File(s)Thumbnail(s)
   
replyreply
 Thanks given by: Chamberpains


Messages In This Thread
Fan not turning on - earnies2 - 06-10-2018,
RE: Fan not turning on - serv - 06-10-2018,
RE: Fan not turning on - Nilao - 06-11-2018,
RE: Fan not turning on - Nilao - 06-12-2018,
RE: Fan not turning on - earnies2 - 07-31-2018
RE: Fan not turning on - Nilao - 06-13-2018,
RE: Fan not turning on - Rawze - 07-02-2018,
RE: Fan not turning on - Nilao - 07-31-2018,
RE: Fan not turning on - Nilao - 07-31-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.