Switching from hotshot to Flatbed
08-15-2018, (Subject: Switching from hotshot to Flatbed ) 
Post: #22
RE: Switching from hotshot to Flatbed
(08-15-2018 )Redland1 Wrote:  Can someone please look at this ECM pull ? Thanks.

at a glance ...

fuel lifetime = 5.5 mpg. not so good.

32% idle time.

rears = 3.70's? -- I would verify that. If correct, that is the only plus.

23% average enigne load. is typical of highway truck.

A max enigne speed of 4,373 rpm is downright scary. -- Abused?


regen system has been blocked up pretty bad in the past too. I see someone probably demandating that thing very soon.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Switching from hotshot to Flatbed - Rawze - 08-15-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.