My Pete rebuild

[Nostalgic]

No pictures, but picked up (hopefully) my last box from Cummins for a while. When I was installing injectors, I found one with a broken screen that held up the works for a few days, but the top end is finally done, and set the overhead last night/this morning. Days are blending with this 8am-3am shift lol. Hoping that injectors are all good ('15 date codes on them, and were listed on the campaign thing that was posted here a while back), but once I go through and install the IFSM I'll at least be able to check for leaks (unless someone knows if it can be done just plugging in one of the ports on the head with a hose?)

I originally bought some reducer with intent to spray the por15, but decided to try brushing with foam brushes instead. Glad I did. I would not attempt to spray that stuff without a fresh air fed mask and full tyvek suit. Looks pretty good with rattle can rustoleum top coat, and best of all, I didn't have to clean a gun.

Several boxes of zip ties, split loom sheathing, and stainless hardware from McMaster is now here waiting for me to start piecing things back together. Seems like every time I feel triumphant in emptying a box, I get a delivery of 2 more.