Exhaust manifold back pressure sensor tube
08-24-2018, (Subject: Exhaust manifold back pressure sensor tube ) 
Post: #16
RE: Exhaust manifold back pressure sensor tube
(08-24-2018 )Chamberpains Wrote:  (snip)...2nd why doesn't mine show a gasket?

Here is the manifold shown in most pics. The gasket is #7


Notice the 10 pages of results. All with different turbo arrangements.


I finally started to see mine on page 4 but it was not pulled apart. On page 10 I found the same style pulled apart. Notice no gasket...
I


Russian hacking...?

Is it possible some don't have a gasket at all? I've dealt with a few manifolds on the automotive side that didn't use any gasket, but called for a graphite anti-seize.
replyreply
 Thanks given by: Chamberpains


Messages In This Thread
RE: Exhaust manifold back pressure sensor tube - Nostalgic - 08-24-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.