Threaded Mode | Linear Mode

Waterloo · 05-09-2016, **(Subject: EGR tune map sensor )**

What are driving? How many miles and which motor? I would pull the Doser too and inspect that. If it is sooted up and toasty looking, you will need to replace that too. Rawze has a video on that one too, it was easy to get to on the CM871 that I own. If you have not looked into it yet, and you have the Cummins, it is best to get yourself an Inline 5 Reader from eBay. This you will need, along with a laptop running at minimum Windows 7. You really need to see what is going on in there in regards to the health of your motor.

Also, if you have not done a proper overhead adjustment/inspection you need to do that too. There is a video on that too, or seeing as you are in GA, MR Haggi is just outside Atlanta and is a very trusted and competent mechanic that can take care of your needs. He is a member here, might be good to get in contact with him.