Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Week end project

new reply
Week end project
09-19-2018, (Subject: Week end project ) 
Post: #12
Contributing Memberlonestar16 Offline
Contributing Member  (34 Likes)  ****

 		Posts: 195
Joined: Apr 2018
Thanks: 36
Given 34 thank(s) in 22 post(s)
RE: Week end project
(09-19-2018 )Rawze Wrote:  
(09-19-2018 )lonestar16 Wrote:  I try not to idle as much as I can to try so I guess 35 is not to bad ..

The CM871 takes exactly 40 minutes if it is healthy. The newer engines are a bit different time span though I think.

I was hope after I did the work this wkn i could of gotten my insite hooked up on it so I could watch in see what was going on but that didnt happen so I'll have to do that soon I hope ..
Return to Top | find
replyreply
new reply


Messages In This Thread
Week end project - lonestar16 - 09-13-2018,
RE: Week end project - Nilao - 09-14-2018,
RE: Week end project - MCRENT - 09-16-2018,
RE: Week end project - Nilao - 09-19-2018,
RE: Week end project - Rawze - 09-19-2018,
RE: Week end project - lonestar16 - 09-19-2018
RE: Week end project - Rawze - 09-19-2018,
RE: Week end project - Rawze - 09-20-2018,
RE: Week end project - Rawze - 11-03-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication