| Injector for ISM 500 |
| 09-20-2018, (Subject: Injector for ISM 500 ) Post: #12 | |||
| |||
RE: Injector for ISM 500 (09-19-2018 )wingover Wrote: Made a tool to pull the injector out and manage to remove it. I heard some fuel dripping into the cylinder and wondering how (if needed) to get the fuel out of the cylinder? Oh dear god, NOOOOO!!! (09-20-2018 )Signature620 Wrote: If you're going to leave it with the injector out you should drain the coolant. It's unlikely but if the head has a few miles on it, the coolant can start leaking around the injector sleeve without the pressure of the injector there. Drain the coolant level below the head immediately, and/or return the injector to installed position as you are begging for trouble! If you drain the coolant, insert a clean rag to keep any possible contaminants from the cylinder, including the errant dropping of a small tool/bolt/washer/anything. Open cylinders ALWAYS need protections from anything not intended to be introduced! User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Injector for ISM 500 - wingover - 09-17-2018, RE: Injector for ISM 500 - Signature620 - 09-17-2018, RE: Injector for ISM 500 - wingover - 09-17-2018, RE: Injector for ISM 500 - Moose - 09-17-2018, RE: Injector for ISM 500 - wingover - 09-17-2018, RE: Injector for ISM 500 - Rawze - 09-18-2018, RE: Injector for ISM 500 - Hammerhead - 09-18-2018, RE: Injector for ISM 500 - wingover - 09-18-2018, RE: Injector for ISM 500 - wingover - 09-19-2018, RE: Injector for ISM 500 - Nilao - 09-20-2018, RE: Injector for ISM 500 - Signature620 - 09-20-2018, RE: Injector for ISM 500 - Hammerhead - 09-20-2018 RE: Injector for ISM 500 - wingover - 09-20-2018, RE: Injector for ISM 500 - Nilao - 09-20-2018, RE: Injector for ISM 500 - wingover - 09-29-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.