King pins tools

[bwake]

(10-06-2018 )Rawze Wrote:  

(10-06-2018 )bwake Wrote:  ...
get the bushing that are a no ream style ...

You cannot get them no-ream for that style Hendrickson front-end as far as I know. The Only ones I could get for mine all have to be a machined fit for those models.

Just a heads up on my own experience with them anyways.

Not sure which style Hendrickson front end you are referring to but you may be correct. I was giving a suggestion to the OP which made no reference to a particular style axle. But, most front axles have the no ream style bushings available for them (like the video you posted) and I wanted any readers to know that there is a difference in the two. As always, anyone doing this type work should be following manufactures specifications and if that is to use a ream style bushing, by all means, that is what should be placed on the truck. Many don't know there is a difference and I was pointing that out to them.
Here is a no ream kit for Hendrickson axle code UC2 and US2.

https://www.google.com/url?sa=t&rct=j&q=...sbjcr154YE