06 CM870 450 ISX

[RJBKSU]

New to the forum have gained much info from forum and videos on isx engines. My family farms and we recently purchased a 9400i international with 06 cm 870. This rig has 510,000 miles on it. I have been around cummins engines on the ag side but mainly the 8.3 and 5.9 and some older 855 big cams. I watched the video on erg tuneup for an 871 and thought i should do this to this 870 since i don't know the history of the truck. I plan on removing the intake pipes like on the video and cleaning them,my questions are which sensors should be cleaned and or replaced. I removed the intake temp and pressure sensors and there was soot on them as expected. I cleaned them. I could not find the delta psi sensor like in the video on the 871 is this in different location on 870? After harvest is complete i plan on pulling truck in shop and doing all these procedures.No check engine light that i am aware of and all sensors seem to be original. My brother does not think it has the power it is supposed to have for the grain trailer he is pulling and i seen the video and decided this should be done anyway and might help. Thank you for posting such great info on these engines.