| Cm870 VGT issue |
| 10-28-2018, (Subject: Cm870 VGT issue ) Post: #3 | |||
| |||
| RE: Cm870 VGT issue So if 120 psi is getting to the actuator rod itself it almost sounds like I have a bad control valve then not sure if it applies to the older style control valve too? Rawze and I checked the voltage going to it as well and it did go up and down when commanding the turbo in 10% increments possibly ruling out the ECM and wiring? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm870 VGT issue - marek4792 - 10-28-2018, RE: Cm870 VGT issue - Unilevers - 10-28-2018, RE: Cm870 VGT issue - marek4792 - 10-28-2018 RE: Cm870 VGT issue - Rawze - 10-28-2018, RE: Cm870 VGT issue - Chamberpains - 10-29-2018, RE: Cm870 VGT issue - marek4792 - 11-06-2018, RE: Cm870 VGT issue - Chamberpains - 11-06-2018, RE: Cm870 VGT issue - Rawze - 11-06-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.