| Reusable placards |
| 11-03-2018, (Subject: Reusable placards ) Post: #3 | |||
| |||
| RE: Reusable placards Get a piece of sheet metal , cut into the size/shape that is needed,stick on the place card, then get some of them big round magnets(75 lbs pull they never move) and attach to the sign. most come with a bolt with a wingnut on them. and if it was me i'd try to make it so the magnet could wobble just a bit so if you had a rounded surface they would hold on better..then you would just have to slap them over the crappy placards. just don't forget to take them with you. Might cost you less than 30 bucks to make. but save you loads of time :) and spray paint is your friend for the old placard, if you cant cover it with yours User's Signature: hard to go 60 mph when the winds blowing 65+ in WY | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Reusable placards - dhirocz - 11-03-2018, RE: Reusable placards - flatbed94kid - 11-03-2018, RE: Reusable placards - stevesparts - 11-03-2018 RE: Reusable placards - Rawze - 11-03-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.