My Pete rebuild

[Nostalgic]

I leave a lot of daily stuff out and generally try to hide my anxiety-ridden paranoias. So I never posted about it, but when I installed my mud flaps and hangers I noticed the right rear frame was lower by about 3/4" or so and it's been driving me crazy ever since. I've been 2nd guessing my eyesight as I looked at the frame trying to find a twist, and have measured just about everywhere on the truck to see what exactly is off. I don't do a lot with suspension in general, so it took me a while to finally narrow it down to what I think is a weak RR leaf. I couldn't tell for sure if it was actually the spring or if the frame was twisted, while the spring was mounted on the truck, but I finally ordered a new leaf, so we'll see...




It's probably a good thing, since I never saw that the factory squished the ABS sensor wire under the plate...