My Pete rebuild |
11-09-2018, (Subject: My Pete rebuild ) Post: #262 | |||
| |||
RE: My Pete rebuild RF has the same wear - there was a spacer between the bearings on it, but both nuts were only finger tight. Spindle wear from 4-8 o'clock. You can rock the bearing on the spindle from top to bottom, but not side to side. Maybe I can get away using my mistake order of loctite 680? | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.