My Pete rebuild

[Nostalgic]

(11-09-2018 )the missing link Wrote:  On the truck lean . Most of the time , I found if a truck is leaning it is in the steering axel springs . You might have said but is it in the driver's side . If it is , the last alliment shop did that to compensate for the crown in the road or could have . Measure the shims on the front axel .Just my own little rant on things .

It's the passenger rear. I measured frame height at a few points at the steer and both sides were equal - and the cab doesn't have any lean to it that I can see, it's just the frame rail on the passenger rear. Since replacing the RR leaf, it went from 3/4 or so low to 3/8" low - I'm pretty confident that if I changed the FR also it would take that last 3/8" out.