My Pete rebuild

[Nostalgic]

Already made my tri-county drive chasing parts and now everyone is closed. Next time the axles are pulled, I'll have protorque nuts to go on.

As for the axle surgeon, if it was just 1 spindle, or even 1 per axle, it would be worth it, but for an extra $2k, I'd rather just put in 2 new axle housings. Wear isn't critical as my original panic, and I'll never let them get neglected to the point that they were, so I went with conmet preloaded hubs.



It's going to be a long night, since I'm replacing and rebushing all of the cams too while I have things apart.

1 prepped, 3 to go.