Repowering a Peterbuilt
11-11-2018, (Subject: Repowering a Peterbuilt ) 
Post: #8
RE: Repowering a Peterbuilt
(11-11-2018 )the missing link Wrote:  If I could , it would be a properly built 871 with a top self tune that would go in it .

Pm me about this please.......
I have only had this Peterbuilt and put 280 miles on the motor and now possibly looking at replacing the block, this if you read this thread you already know.
I can tell you it has already had an egr delete but vgt is still on motor. I have no idea as to the extent of program tuning or other modifications the program has had.
If I stay with this motor , while the engine is down and being pulled ............

Who, what , and where to send ecm? Ideas ? Good bad and ugly? Where , who, and what to avoid?



I have had this done to my Detroit and that truck is now a real hoss and oil analysis shows its tuned good. Won’t know the rest till I get to doing an inframe on it in a few years.


User's Signature: Have you checked your muffler bearings today?
replyreply


Messages In This Thread
RE: Repowering a Peterbuilt - Peashooter67 - 11-11-2018
RE: Repowering a Peterbuilt - Unilevers - 11-11-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.