| CM2250 stalling at idle |
| 11-13-2018, (Subject: CM2250 stalling at idle ) Post: #7 | |||
| |||
| RE: CM2250 stalling at idle I'm not sure it's the ECM, but will now look towards that direction and monitor it. The one day I went to start it up and it cranked but didn't start like it wasn't getting any fuel. After key cycling it started right up. If it is ECM I'm guessing it will get worse and worse till it shuts off every few seconds. I thought these ECMs were stronger than that. :| Fault codes I've received recently: FC0559 - 2 count - "Injector Metering Rail 1 Pressure - Data Valid But Below Normal Operating Range - Moderately Severe Level" FC1942 - 1 count - "Crankcase Pressure - Data erratic, intermittent or incorrect" | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CM2250 stalling at idle - zyNoT - 11-13-2018, RE: CM2250 stalling at idle - fargonaz - 11-13-2018, RE: CM2250 stalling at idle - Lonestar10 - 11-13-2018, RE: CM2250 stalling at idle - the missing link - 11-13-2018, RE: CM2250 stalling at idle - zyNoT - 11-13-2018, RE: CM2250 stalling at idle - RTRUCKING48 - 11-13-2018, RE: CM2250 stalling at idle - Chamberpains - 11-13-2018, RE: CM2250 stalling at idle - zyNoT - 11-13-2018 RE: CM2250 stalling at idle - snailexpress - 11-13-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.