Repowering a Peterbuilt
11-13-2018, (Subject: Repowering a Peterbuilt ) 
Post: #20
RE: Repowering a Peterbuilt
I’m waiting to hear back as to the Oil journal is cracked or not and/or the results of plasti gauging the rods/mains is/are the culprit to the extreamly low oil pressure.

If it’s the block and a crack is found I guess I’ll be looking for another block.
If it’s the/a rod/main bear wrong size then I’ll be getting some rod and main bearings.

Thanks!


User's Signature: Have you checked your muffler bearings today?
replyreply


Messages In This Thread
RE: Repowering a Peterbuilt - Unilevers - 11-11-2018,
RE: Repowering a Peterbuilt - Peashooter67 - 11-13-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.