2250 pump failure.....and the result. |
11-14-2018, (Subject: 2250 pump failure.....and the result. ) Post: #8 | |||
| |||
RE: 2250 pump failure.....and the result. Its not only if your current pump has been updated .... it may be a question of why it was updated? in other words did it fail? was the engine checked internally for damage? I bought a non running pete with cm2250 and ...yep it was the pump that failed. I could have replaced pump and put it up for sale ....so be wary of these engines. It was a lengthy process of disassembling engine, flushing and rolling in new mains and rods. The repair on pump is replacing barrels and plunger (steel) and rollers and tappets. Cost is only about $500 bucks but Cummins is trying to head everyone to replacing pump at a cost of $4000. On quickserve for my engine the rebuild parts are no longer listed, it is replace only. I have a 2013 pete but the build date of engine was 2010, so vehicle year is not what you want to go by. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
2250 pump failure.....and the result. - preacherboy24 - 05-04-2016, RE: 2250 pump failure.....and the result. - preacherboy24 - 05-04-2016, RE: 2250 pump failure.....and the result. - Waterloo - 05-04-2016, RE: 2250 pump failure.....and the result. - jimeneztrans84 - 05-04-2016, RE: 2250 pump failure.....and the result. - Moore - 11-14-2018, RE: 2250 pump failure.....and the result. - Rawze - 11-14-2018, RE: 2250 pump failure.....and the result. - imalumberjack - 11-14-2018 RE: 2250 pump failure.....and the result. - Moore - 11-16-2018, RE: 2250 pump failure.....and the result. - Rawze - 11-16-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.