isx cm871 coolant pressurized |
05-16-2016, (Subject: isx cm871 coolant pressurized ) Post: #32 | |||
| |||
RE: isx cm871 coolant pressurized (03-14-2016 )jlgc905 Wrote: I recently did the {**Content removed by protection bot**- content.}. Its a used truck that i bought. 2009 pete 387. Im having issues with loosing coolant. I ve noticed that with fan clutch onn at all times nothing happens. And with fan off amd NORMAL TEMPERATURE i IMMEDIATELY lose coolant. System is being pressurized. Water is leaking from overfill hose. Any ideas?? Last week I had the same issue. It was the compressor head. Funny, I bought a new reman compressor a month ago, whoever has rebuilt that head he tightened the bolts too hard (they are rated 5 Nm) when I took them off it felt a lot more than that. One bolt was cracked, loosed gasket, pressure in the coolant system. It is a easy fix, buy a repair kit from cummins 150-170$. Instead of draining the coolant off I used two end caps and two threaded plugs to block the coolant flow | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.