| Injector Spill Valve |
| 11-25-2018, (Subject: Injector Spill Valve ) Post: #13 | |||
| |||
RE: Injector Spill Valve (11-25-2018 )indian_richard Wrote: What are your thoughts on changing the fuel connector along with a new injector? I noticed the book mandates this, but of course I didn't find out until everything's tore apart. The fuel connector tip mates and is literally crushed/deformed to the injector to hold back the 40,000+ PSI of fuel pressure. That is its seal, because no o-ring would hold that kind of pressure back. - Replacing it is a MUST if you want to ensure you don't get an internal leak. Fuel connector needs to be replaced when... - If the injector is replaced. - If the head is replaced, then all 6 of the fuel connectors need replacing. - If an injector is moved to another location on the head. - If it has been removed more than a couple times. It is also important to torque them properly and to spec. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.