ECM wire connectors

[imalumberjack]

(11-29-2018 )the missing link Wrote:  I am not sure on the 2250 but on my 871 there are pins inside . The outer shell is just a plastic shell . There should be zip ties on the bottom holding it together. Or at least on my 871 .
If you pull the plug off make sure you start the plug in first and as you tighen the screw in ,you wiggle the plug the whole time . If the pins don't line up you can push the pins in on the ecm or the plug .
Remember talk to someone a whole lot smarter then me before you take my advice to serious.

what it feels like ...is the thing has been loose for awhile and maybe vibrated until there is no hold on internal pins? It feels sloppy :-(