Inspecting kingpins

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-28-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Inspecting kingpins

12-10-2018, (Subject: Inspecting kingpins )

Post: #9

Unilevers
Unregistered ( Likes)

Thanks:
Given thank(s) in post(s)

RE: Inspecting kingpins

the spec is based of Kingpin size (diameter) and is far greater than most people think it is.. They have to be VERY worn to fail. i believe in the neighborhood of 0.125" on a standard diameter kingpin (i would have to go look up the exact spec)

Jack it up on the axle, mount a dial indicator on it, and use a bar to rock the kingpin IN AND OUT. the play is not vertical it is horizontal. Most seem massively worn out but are within spec, 1/8 inch play is alot.

Uni

Return to Top |

Thanks given by:

big_roy , rrod , flatbed94kid , PuroCumminsPower , ZeroNthedark

« Next Oldest | Next Newest »

Messages In This Thread

Inspecting kingpins - rrod - 12-09-2018,

RE: Inspecting kingpins - Nilao - 12-09-2018,

RE: Inspecting kingpins - rrod - 12-09-2018,

RE: Inspecting kingpins - Rawze - 12-10-2018,

RE: Inspecting kingpins - flatbed94kid - 12-09-2018,

RE: Inspecting kingpins - rrod - 12-09-2018,

RE: Inspecting kingpins - flatbed94kid - 12-09-2018,

RE: Inspecting kingpins - Nilao - 12-09-2018,

RE: Inspecting kingpins - rrod - 12-09-2018,

RE: Inspecting kingpins - Unilevers - 12-10-2018

RE: Inspecting kingpins - bwake - 12-11-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design