| Hub bearing adjustment w/dial indicator |
| 12-22-2018, (Subject: Hub bearing adjustment w/dial indicator ) Post: #4 | |||
| |||
| RE: Hub bearing adjustment w/dial indicator I made my own with a bottle jack and some plate steel and small "i" beams. Just remember to clean thoroughly the hub and races after pressing them in. Aluminum flakes have tendency to come off the hub while pressing the in. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Hub bearing adjustment w/dial indicator - DosGatos - 07-29-2018, RE: Hub bearing adjustment w/dial indicator - Rawze - 07-29-2018, RE: Hub bearing adjustment w/dial indicator - DosGatos - 12-21-2018, RE: Hub bearing adjustment w/dial indicator - Chamberpains - 12-22-2018 RE: Hub bearing adjustment w/dial indicator - DosGatos - 02-17-2019, RE: Hub bearing adjustment w/dial indicator - 74bassman - 05-23-2020, RE: Hub bearing adjustment w/dial indicator - RocketScott - 07-15-2020, RE: Hub bearing adjustment w/dial indicator - Volvo8873 - 07-15-2020, RE: Hub bearing adjustment w/dial indicator - Mattman - 07-15-2020, RE: Hub bearing adjustment w/dial indicator - Rawze - 07-15-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.