Tripac APU "Pre Evolution" |
12-22-2018, (Subject: Tripac APU "Pre Evolution" ) Post: #8 | |||
| |||
RE: Tripac APU "Pre Evolution" I don't know Evolution but usually this logic designed as Ignition ON - fuel pump ON, shutoff solenoid ON START - energize starter RUN - flywheel sensor signal pulses are present, oil pressure signal good, coolant temperature good, might be some more signals monitoring. If flywheel pulses present and any one sensor(oil, coolant temperature) fail immediately shutoff solenoid OFF, fuel pump OFF. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.