Tripac APU "Pre Evolution"

[Lonestar10]

Alternator is performing fine its like the programming in the APU was reaching its perscribed stop voltage and shutting down then after about 2 minutes of shutting down it got below the set start voltage and started back up creating a vicious cycling of start stop.

as soon as i turned on park lights it limited how fast the voltage climbed and APU ran as it ran for almost 45min till it shut off and stayed off for about 20min with lights on till it restarted that i expect more then 2min off 2min on run times.

i probably need to have the programming for voltage on off changed by TK or always have a small load on the system as all my park lights except the lights in my headlight housings are LED.