CM 871 help please

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-26-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

CM 871 help please

12-26-2018, (Subject: CM 871 help please )

Post: #2

marek4792 Offline

Offline

HMR-Contrinbuting V.I.P. (461 Likes)

Posts: 661
Joined: Jan 2016

Thanks: 357
Given 461 thank(s) in 296 post(s)

RE: CM 871 help please

How are your u-joints, carrier bearing, and driveshafts? I found a bad injector on my truck over at Haggai's doing the bubble test with the key first then by hand. When I was barring the engine I could get it to turn but then it would get really hard to turn like almost you're gonna break something tight and note where it got tight pulled out said injector sure enough it was dripping quite abit from the tip when held upright after holding it 90° from the ground when removing the injector..

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

CM 871 help please - Ryeguy475 - 12-26-2018,

RE: CM 871 help please - marek4792 - 12-26-2018

RE: CM 871 help please - Roysbigtoys - 12-27-2018,

RE: CM 871 help please - shoe128 - 01-01-2019,

RE: CM 871 help please - Ryeguy475 - 12-27-2018,

RE: CM 871 help please - Ryeguy475 - 12-27-2018,

RE: CM 871 help please - Rockhwy - 12-27-2018,

RE: CM 871 help please - Ryeguy475 - 12-27-2018,

RE: CM 871 help please - Waterloo - 12-27-2018,

RE: CM 871 help please - slowpoke - 12-27-2018,

RE: CM 871 help please - Mrkentee - 12-28-2018,

RE: CM 871 help please - Rawze - 12-28-2018,

RE: CM 871 help please - Ryeguy475 - 12-28-2018,

RE: CM 871 help please - Rawze - 12-28-2018,

RE: CM 871 help please - Ryeguy475 - 12-28-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design