belt noise, bearing

new reply

Threaded Mode | Linear Mode

belt noise, bearing

12-29-2018, (Subject: belt noise, bearing )

Post: #2

Waterloo Offline

HMR-Contrinbuting V.I.P. (4129 Likes)

Posts: 4,617
Joined: Oct 2014

Thanks: 5334
Given 4129 thank(s) in 2094 post(s)

RE: belt noise, bearing

I don't know much about an ISX 12, but on my CM-871 this is the pulley that likes to fail... https://class8truckparts.com/cummins-368...ulley.html

Mine is located on the passenger side, top of motor, up by the AC compressor. Gates makes these too, cost is about half of what Cummins charges. I have found life expectancy on either to be about the same.

Remove the belts and start wiggling the pulleys. If it is a bad pulley, you should be able to find it that way.

Return to Top | find

reply reply

Thanks given by:

imalumberjack

« Next Oldest | Next Newest »

new reply

Messages In This Thread

belt noise, bearing - imalumberjack - 12-29-2018,

RE: belt noise, bearing - Waterloo - 12-29-2018

RE: belt noise, bearing - imalumberjack - 12-29-2018,

RE: belt noise, bearing - Waterloo - 12-29-2018,

RE: belt noise, bearing - Rawze - 12-29-2018,

RE: belt noise, bearing - Nilao - 12-29-2018,

RE: belt noise, bearing - dhirocz - 12-30-2018,

RE: belt noise, bearing - Baco74 - 12-30-2018,

RE: belt noise, bearing - dhirocz - 12-30-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.