Bent rear axle?

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-25-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Bent rear axle?

12-30-2018, (Subject: Bent rear axle? )

Post: #16

imalumberjack Offline

Offline

Contributing Member (135 Likes)

Posts: 264
Joined: Feb 2018

Thanks: 240
Given 135 thank(s) in 92 post(s)

RE: Bent rear axle?

Update: pulled axle and hub ......nothing noticeable!!!!:-(((( I'm not sure how I would find a bend in axle flange? no cracks, twists or stress marks? tried rolling it on trailer deck (kinda rough) nothing jumped out at me? Bearings? looked like new? the only thing I noticed was at removal, it was like Rawze said ...they were not tight? I could not move hub up and down or in and out but when I removed adjuster nuts I did it with my fingers (a slight single tap with hammer) obviously not 200 ft pounds? could not see any gap at race (pulled sleeve)?

Plan is to reinstall hub and bearings in morning and torque? maybe install one tire and spin? option 2) is replace hub, bearings and axle??????

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - tree98 - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - Waterloo - 12-29-2018,

RE: Bent rear axle? - Waterloo - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - Rawze - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - snailexpress - 12-30-2018,

RE: Bent rear axle? - Rawze - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - Rockhwy - 12-29-2018,

RE: Bent rear axle? - Nostalgic - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-29-2018,

RE: Bent rear axle? - imalumberjack - 12-30-2018

RE: Bent rear axle? - tree98 - 12-30-2018,

RE: Bent rear axle? - imalumberjack - 12-30-2018,

RE: Bent rear axle? - Hammerhead - 01-02-2019,

RE: Bent rear axle? - imalumberjack - 12-30-2018,

RE: Bent rear axle? - Nostalgic - 12-30-2018,

RE: Bent rear axle? - imalumberjack - 12-30-2018,

RE: Bent rear axle? - snailexpress - 12-31-2018,

RE: Bent rear axle? - Nilao - 12-31-2018,

RE: Bent rear axle? - imalumberjack - 12-31-2018,

RE: Bent rear axle? - imalumberjack - 01-01-2019,

RE: Bent rear axle? - Rawze - 01-02-2019,

RE: Bent rear axle? - imalumberjack - 01-02-2019,

RE: Bent rear axle? - Hammerhead - 01-02-2019,

RE: Bent rear axle? - imalumberjack - 01-02-2019,

RE: Bent rear axle? - Rawze - 01-03-2019,

RE: Bent rear axle? - Nilao - 01-02-2019,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design