2007 T800 Kw tail light back feed |
01-02-2019, (Subject: 2007 T800 Kw tail light back feed ) Post: #8 | |||
| |||
RE: 2007 T800 Kw tail light back feed My dad has an 07 t800 and so does the neighbour down the road. They both do it. Was told by Kenworth that the load on some led lights is not enough to fully get the relay to shut off, and sudgested to switch to non led tail lights or add a resistor. I think some led tail lights have the resistor built in. Not sure would have to research that. User's Signature: 2008 KWT800 CM570 18spd 4.10’s | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
2007 T800 Kw tail light back feed - akwman - 11-18-2018, RE: 2007 T800 Kw tail light back feed - Waterloo - 11-18-2018, RE: 2007 T800 Kw tail light back feed - Chamberpains - 11-18-2018, RE: 2007 T800 Kw tail light back feed - stevesparts - 11-18-2018, RE: 2007 T800 Kw tail light back feed - Hammerhead - 01-02-2019, RE: 2007 T800 Kw tail light back feed - Rawze - 11-18-2018, RE: 2007 T800 Kw tail light back feed - Rounded_nut - 11-18-2018, RE: 2007 T800 Kw tail light back feed - Waterloo - 11-18-2018, RE: 2007 T800 Kw tail light back feed - mj9770 - 01-02-2019 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.