CM870 EGR replacement |
05-22-2016, (Subject: CM870 EGR replacement ) Post: #3 | |||
| |||
RE: CM870 EGR replacement If the fitting does round out, get a larger nut with that diameter and have someone mig weld it to the old fitting. Of course you're going to need to cut the tube. Should probably replace them anyway. Heat, soak, repeat. 50 / 50 Mix of Automatic transmission fluid and acetone works great. User's Signature: 2010 386 Pete CM871, 13 spd. 3.55 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
CM870 EGR replacement - tree98 - 05-21-2016, RE: CM870 EGR replacement - Nilao - 05-21-2016, RE: CM870 EGR replacement - in2trux - 05-22-2016 RE: CM870 EGR replacement - tree98 - 05-22-2016, RE: CM870 EGR replacement - Rawze - 05-22-2016, RE: CM870 EGR replacement - 1096 - 05-22-2016, RE: CM870 EGR replacement - Makmak - 11-27-2018, RE: CM870 EGR replacement - tree98 - 05-22-2016, RE: CM870 EGR replacement - Unilevers - 05-22-2016, RE: CM870 EGR replacement - tree98 - 05-22-2016, RE: CM870 EGR replacement - trucklogger2 - 05-22-2016, RE: CM870 EGR replacement - tree98 - 05-22-2016, RE: CM870 EGR replacement - tree98 - 05-22-2016, RE: CM870 EGR replacement - trucklogger2 - 05-22-2016, RE: CM870 EGR replacement - tree98 - 05-22-2016, RE: CM870 EGR replacement - Nilao - 05-23-2016, RE: CM870 EGR replacement - trucklogger2 - 05-23-2016, RE: CM870 EGR replacement - tree98 - 05-23-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.