Proper RPM for PTO operation |
01-07-2019, (Subject: Proper RPM for PTO operation ) Post: #4 | |||
| |||
RE: Proper RPM for PTO operation (01-07-2019 )NoTime Wrote: I haul propane and have to pump off 1 to 2 times a day and it takes about an hour. I have a valve on trailer that I can control how fast the pump runs but my problem is if I idle it up to a 1000 RPM I can’t open up the valve very far because the pump on the trailer can only run so fast which heats my hydraulic fluid up pretty high even with a hydro pack to help cool the oil. If I idle around 700 I can open valve all the way up and it keeps my fluid cooler. Kind of a catch 22. re-gear it so you can get above 1000 with it. Engine will last much longer. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Proper RPM for PTO operation - NoTime - 01-07-2019, RE: Proper RPM for PTO operation - snailexpress - 01-07-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-07-2019, RE: Proper RPM for PTO operation - Rawze - 01-07-2019 RE: Proper RPM for PTO operation - NoTime - 01-07-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-07-2019, RE: Proper RPM for PTO operation - NoTime - 01-07-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-08-2019, RE: Proper RPM for PTO operation - the missing link - 01-08-2019, RE: Proper RPM for PTO operation - NoTime - 01-08-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-11-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.