| Proper RPM for PTO operation |
| 01-07-2019, (Subject: Proper RPM for PTO operation ) Post: #7 | |||
| |||
| RE: Proper RPM for PTO operation I would say around 150 at 1000 RPM. At 700 RPM the lines are just barely warm. Of course a lot depends on where I’m pumping off at but when I’m pumping off butane it’s a little hotter because I don’t have any pressure to help unload | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Proper RPM for PTO operation - NoTime - 01-07-2019, RE: Proper RPM for PTO operation - snailexpress - 01-07-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-07-2019, RE: Proper RPM for PTO operation - Rawze - 01-07-2019, RE: Proper RPM for PTO operation - NoTime - 01-07-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-07-2019, RE: Proper RPM for PTO operation - NoTime - 01-07-2019 RE: Proper RPM for PTO operation - imalumberjack - 01-08-2019, RE: Proper RPM for PTO operation - the missing link - 01-08-2019, RE: Proper RPM for PTO operation - NoTime - 01-08-2019, RE: Proper RPM for PTO operation - imalumberjack - 01-11-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.