Turbo Table editing.

[Lonestar10]

so got around tonight to removing the load based speed control in tuning since i couldn't in insite.

i do beleive T_LBSC_En***set to 0 should have this feature completely off as setting high breakpoints did nothing and it kept limiting.


now right now i have to be above 1500rpm to build boost while engine braking and thats a minimum to get good engine braking i have to be downshifting staying in the 1500-1800rpm area otherwise it falls on its face.

which table do i edit to get more turbo braking in the ranges below 1500rpm

or do i edit C_TGC_EB_I_*** "Base integral gain for Turbo Geometry Controller under engine braking" to make it come on faster? currently set at 1.5

i have a base knowledge of what im doing definately not a pro like a few on here but i feel confident in changing some things just not totally going all out experimenting.

"Edited to spell braking correctly oy dumb truck driver"