Turbo Table editing. |
01-21-2019, (Subject: Turbo Table editing. ) Post: #5 | |||
| |||
RE: Turbo Table editing. (01-21-2019 )Lonestar10 Wrote: ok didnt know that....what could possible be wrong than please. turbo/actuator are only about 100k old. after that overheads 5k ago what all do i need to look at? my engine break was great untill i demandated truck after that it became weak so i thought maybe something was changed. If you suspect something in the programming, pull the program out of the truck with CT and e-mail it to me to have it inspected. NO, a proper de-mandate does NOT weaken the engine brake. Unclogging the exhaust system itself of all the emiss. garbage, if it has been clogged for a long time, might make slight change, but not significant enough for most ppl to notice. going from "great" to "weak" via something in the programming is NOT something that is going to happen if the demandate program was done right. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Turbo Table editing. - Lonestar10 - 01-20-2019, RE: Turbo Table editing. - Rawze - 01-21-2019, RE: Turbo Table editing. - Lonestar10 - 01-21-2019, RE: Turbo Table editing. - Rawze - 01-21-2019 RE: Turbo Table editing. - Waterloo - 01-21-2019, RE: Turbo Table editing. - iceman - 01-21-2019, RE: Turbo Table editing. - Waterloo - 01-21-2019, RE: Turbo Table editing. - ynot - 01-21-2019, RE: Turbo Table editing. - Lonestar10 - 01-21-2019, RE: Turbo Table editing. - Rawze - 01-22-2019, RE: Turbo Table editing. - Lonestar10 - 01-22-2019, RE: Turbo Table editing. - Signature620 - 01-22-2019, RE: Turbo Table editing. - Mr Hagg - 01-22-2019, RE: Turbo Table editing. - tree98 - 01-22-2019, RE: Turbo Table editing. - Rawze - 01-22-2019, RE: Turbo Table editing. - Lonestar10 - 01-22-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.