| No start after actuator and fuel shutoff solenoid replaced |
| 02-01-2019, (Subject: No start after actuator and fuel shutoff solenoid replaced ) Post: #3 | |||
| |||
| RE: No start after actuator and fuel shutoff solenoid replaced It is put in the correct way according to quickserve. When I got all the parts on it did run then started to hop rpm by 300-400 rpm it's like it was getting fuel built up then drop pressure which I believe is what was causing it to bounce that so much rpm, I shut it off when the rpm was dropping. Then I tried to start it again and it wouldn't fire up. Been like that since Tuesday. It was negative 35 on Wednesday and Thursday. Today it's 11 above. The fuel is not gelled. It's got winter blend in it and power service anti gel additive. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
No start after actuator and fuel shutoff solenoid replaced - Husky05 - 02-01-2019, RE: No start after actuator and fuel shutoff solenoid replaced - Husky05 - 02-01-2019 RE: No start after actuator and fuel shutoff solenoid replaced - Nilao - 02-01-2019, RE: No start after actuator and fuel shutoff solenoid replaced - Rawze - 02-03-2019, RE: No start after actuator and fuel shutoff solenoid replaced - Nilao - 02-03-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.