No start after actuator and fuel shutoff solenoid replaced
02-01-2019, (Subject: No start after actuator and fuel shutoff solenoid replaced ) 
Post: #4
RE: No start after actuator and fuel shutoff solenoid replaced
So I decided to fill up the davco filter after the priming pump stops, then I cranked it and it fired up and ran for like 5 seconds and died, I watched insite the pressure went up to 272psi then slowly went down as I ran out of fuel in the davco filter. So I'm guessing ice build up in the fuel line between the davco and tank.
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: No start after actuator and fuel shutoff solenoid replaced - Husky05 - 02-01-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.