CM2250

[Rawze]

(02-13-2019 )sstrong1 Wrote:  Can I just take it to prices and have it checked our

you can ...

* Get a copy of CT and pull the program yourself. (best thing to do so your not reliant on ANYONE if you ever need ecu replaced, re-programming, etc. ).

* Take it to gearheads shop, though these days I am suspicious of their work a bit because this "chirs" guy seems a bit shady to several of the guys I have sent over there + gearhead himself is impossible to get a hold of for most people. - Still, I have not seen anything bad come from them, so, yes, I still recommend them to ppl.

* Get with Unilevers or Mommaburt and have them help you pull the file out using remote desktop, or other means.

* Take it to Mr. Hags (best place most guys on here would recommend if you truly want the whole job inspected/problems found/truck fixed/ not just the programming).

* You could stop by here some time and I will sit down with you and your programming and show you every line of code in that program someone has edited and show you how good or bad it may be for your engine so that you can decide for yourself. - I don't do remote desktop. i only help people that come here when I have time to help them, or I will also look at their program if they e-mail it to me for an objective opinion.