CM870 vibration and black smoke
02-14-2019, (Subject: CM870 vibration and black smoke ) 
Post: #12
RE: CM870 vibration and black smoke
They usually are the wires that run over to the starter for charging purposes. There will also be the wires that run the a\c compressor, a\c high pressure switch, EGR valve wires, exhaust gas pressure sensor, turbo speed sensor, coolant temp sensor, exhaust pyro sensor (if equiped) and sometimes the low coolant level sensor wires (depending on where the coolant surge tank is) they run all these wires over the engine between the front gear case and valve cover.
replyreply
 Thanks given by: Mluper7


Messages In This Thread
RE: CM870 vibration and black smoke - Chamberpains - 02-14-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.