CM870 vibration and black smoke

[Mluper7]

(02-16-2019 )Rawze Wrote:  

(02-16-2019 )Mluper7 Wrote:  ...
did a cut out test with one injector on and went through them all. They all seemed strong and
...
...
An other suggestions fellas?

before you do a cut-out test, you need to adjust the overhead valves properly, then to an injector leak test,... that and only then can you do a cut-out test properly, as if you have leaky injector(s), the cut-out test will give you false results.

http://rawze.com/forums/showthread.php?t...4#pid35344

It is due for a over head.