Curious questions

[the missing link]

(03-03-2019 )rraccerr Wrote:  

(03-02-2019 )Magard Wrote:  Rraccerr what tranny do you have. A 10 is hard to do exactly what you want to cause you have close to 600rpm shifts so sometimes you’re gonna be pulling at a rpm you really don’t like. The liner shims suck in these engines so just start a rebuild fund. Your gonna need it. Also plan your overhaul so you have control of the work or get it to some of the guys on this forum. Don’t be a victim of some shi#t hole shop, I mean dealer, I mean some delete shop with there different stages of bend over.

I don’t know what tranny I have. I have a thirteen speed. And yes I am planning on doing a overhaul when I feel the engine is totally gone. I do have a rough idle right now. I’m in the process of getting a inline six with a insite software. I been watching Rawze do his overhaul on utube and I want to diagnose all problems that flash on my dash. Right now i have a SCRproblem. And I’m registered with Cummins to view their service Manuel’s.

A 13 sd tranny is a very good transmission . It let's you have 250 rpm shifts on the " top" side . Don't be afraid to split those puppy's .