T660 - Side Light / Blinker
03-11-2019, (Subject: T660 - Side Light / Blinker ) 
Post: #9
RE: T660 - Side Light / Blinker
Never pierce the wire. If you must, back probe the next connector in line. That's pushing your probe in the back side of the connector thru the weather packing or safer yet, learn how to pull the plug apart and slide the weather packing out to do your probing. Then silicone seal the weather packing back in when done.
replyreply
 Thanks given by: JKBowman , barf


Messages In This Thread
RE: T660 - Side Light / Blinker - Chamberpains - 03-11-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.